XIV International Scientific and Practical Conference «INNOVATIONS IN MECHANICAL ENGINEERING»

XIV International Scientific and Practical Conference «INNOVATIONS IN MECHANICAL ENGINEERING»

26 November — 02 December 2023 Kemerovo, Russia

T.F. Gorbachev Kuzbass State Technical University

The conference “Innovations in Mechanical Engineering” is devoted to discussing the current problems of the engineering industry — a strategic industry, without which a stable, sustanable, dynamically developing economy is impossible.
In modern engineering, there are changes characteristic of the transition to Industry 4.0, to industrial and scientific technologies of the 6th technological order.
At the same time, due to well-known objective factors in a number of industries, including heavy, power and transport engineering in a number of regions, a significant technological backwardness is observed, there are methods and technologies characteristic of the 4th technological order. At the same time, there are no modern methods and technologies for machining, assembling and controlling the critical parts of machines, the level of labor productivity and organization of production is low.
The scientific and practical conference «Innovations in Mechanical Engineering» (InMash-2023) with the participation of leading Russian and foreign scientists can fill the information gap, raise the level of competence of the engineering corps of enterprises, young researchers, graduate students, postgraduates, and doctoral students.
The purpose of the conference is to create conditions for meeting and sharing the results of fundamental and applied studies in this subject area among scientists and specialists, leading Russian and foreign universities, research institutes, enterprises, establishing new links between scientific communities at the international level, developing regional and international cooperation. The conference will allow its participants to systematize the accumulated knowledge in the field of mechanical engineering and basic sciences in general.
It is expected that scientists from Belarus and other countries will take part in the conference.

Important dates

  1. Registration Deadline: 31 October, 2023.
  2. Papers submission Deadline: 30 June, 2023.
  3. Author Notification Date: 30 Jule, 2023.

 

FOUNDER

  • T.F. Gorbachev Kuzbass State Technical University

 

SCIENTIFIC DIRECTIONS

  1. Section 1. Innovative technological processes of parts manufacturing, machine assembly and procurement production
  2. Section 2. Technological equipment and digitalization of machine-building industries
  3. Section 3. Mining engineering
  4. Section 4. Nanotechnology, composite materials and materials science in mechanical engineering
  5. Section 5. Strengthening technologies and functional coatings
  6. Section 6. Organization of machine-building production and personnel training
  7. Section 7. Innovation management in modern conditions
  8. Section 8. Abrasive processing processes, abrasive tool production technologies, tools and methods of automated control of abrasive processing processes

 

PARTNERS

    • Federal Research Center for Coal and Coal Chemistry of the Siberian Branch of the Russian Academy of Sciences, Kemerovo, Russia

 

HONORARY COMMITTEE

    KONTOROVICH Aleksey E., Dr.Sc., Professor, academician of RAS, Federal research center of coal and coal chemistry of the Siberian branch of the Russian Academy of Sciences (Kemerovo, Russia);
    MIROSHNIK Aleksandr I., Altaivagon (Novoaltajsk, Russia)
    MIKHAILOV Alexander N., Dr.Sc., Professor (Donetsk, Russia)
    POPOVA Lyubomira, Dr.Sc., Professor (Veliko Tarnovo, Bulgaria)
    PRIKHOD’KO Vyacheslav M., Dr.Sc., Professor, corresponding member of RAS (Moscow, Russia)
    SUSLOV Anatoly G., Dr.Sc., Professor (Moscow, Russia)
    CHIZIK Sergey A., Dr.Sc., Professor, academician of NAS, (Minsk, Belarus)
    QIU Jianrong, Dr.Sc., Professor (Hangzhou, Zhejiang, China)
     

    Program committee

    • BALASANYAN Boris S., Doctor of Technical Sciences, Professor, Head of the Department of Mechanical Engineering Technologies and Automation, National Polytechnic University of Armenia, Yerevan, Republic of Armenia;
    • PANTELEENKO Fedor I., Doctor of Technical Sciences, Professor, Corresponding Member of the National Academy of Sciences of Belarus, Head of the Department of Powder Metallurgy, Welding and Materials Technology, Belarusian National Technical University, Minsk, Belarus;
    • PETROVA Mariana M., Ph.D., Professor, St. Cyril and Methodius University of Veliko Tarnovo, Veliko Tarnovo, Bulgaria;
    • PODDUBKO Sergey N., Candidate of Technical Sciences, Associate Professor, General Director of the Joint Institute of Mechanical Engineering of the National Academy of Sciences of the Republic of Belarus, Minsk, Belarus;
    • LIU Songyun, Doctor of Technical Sciences, Professor, Deputy Director of Mechatronic Engineering, China University of Mining and Technology, Xuzhou, China;
    • MA Yunwen, Doctor of Technical Sciences, Professor, Supervisor of Doctoral Studies at Nanjing University of Post and Telecommunications, Director of Suzhou Industrial Vocational College, Xuzhou, China;
    • CHEN Ping, Doctor of Technical Sciences, Professor, Deputy Director of the Institute of Information and Control Engineering of the Chinese University of Mining and Technology, Xuzhou, China;
    • TANG Zhi, Doctor of Technical Sciences, Professor, Institute of Mechanical Engineering, Donghua University, Shanghai, China;
    • LI Fashe, Doctor of Technical Sciences, Professor, Head of the Educational and Methodological Department of the Kunming University of Science and Technology, Kunming, China;
    • QIU Jianbei, PhD, Professor, Institute of Materials Science and Engineering, Kunming University of Science and Technology, Kunming, China;
    • XU Xuhui, PhD, Professor, Institute of Materials Science and Engineering, Kunming University of Science and Technology, Kunming, China;
    • GUO Qianjian, Doctor of Technical Sciences, Professor, Deputy Director of the Institute of Mechanical Engineering of Shandong Technological University, Zibo, China;
    • FENG Wei, PhD, Professor, Director of the Institute of Mechanical Engineering and Engineering of Chengdu University, Chengdu, China;
    • YU Xue, PhD, Professor, Institute of Mechanical Engineering and Engineering of Chengdu University, Chengdu, China;
    • HAN Tao, PhD, Professor, Institute of Metallurgy and Materials Science, Chongqing University of Science and Technology, Chongqing, China;
    • LI Lu, PhD, Professor, Director of the Institute of Materials Science and Engineering of Chongqing University of Arts and Sciences, Chongqing, China;
    • LUO Tiangong, Doctor of Technical Sciences, Professor, Director of the Institute of Intellectual Production of Chongqing University of Arts and Sciences, Chongqing, China;
    • HEIFETS Mikhail L., Doctor of Technical Sciences, Professor, Director of the Institute of Applied Physics of the National Academy of Sciences of the Republic of Belarus, Minsk, Belarus;
    • SHELEG Valery K., Doctor of Technical Sciences, Professor, Corresponding Member of the National Academy of Sciences of the Republic of Belarus, Head of the Department of Mechanical Engineering Technology of the Belarusian National Technical University, Minsk, Belarus.

    Organizing committee

    • DEMIN Viktor Alekseevich, Doctor of Technical Sciences, Professor, Bauman Moscow State Technical University, Moscow, Russia;
    • GOLOVIN Evgeny Dmitrievich, Candidate of Technical Sciences, Head of the Department of Mechanical Engineering Technology Novosibirsk State Technical University, Novosibirsk, Russia;
    • ZAYDES Semyon Azikovich, Doctor of Technical Sciences, Professor of the Department. Engineering Technologies and Materials of Irkutsk National Research Technical University, Irkutsk, Russia;
    • Lyudmila Ivanovna ZAKONNOVA, Doctor of Biological Sciences, Professor of the Department of Mining and Technosphere Safety of the branch of KuzSTU in Belovo, Russia;
    • ILYIN Alexander Gennadievich, Chairman of the Board of Directors of the Siberian Technical Company, Moscow, Russia;
    • Anna L. KAMENEVA, Doctor of Technical Sciences, Professor of the Department of Innovative Technologies of Mechanical Engineering, Perm National Research Polytechnic University, Perm, Russia;
    • KIRICHEK Andrey Viktorovich, Doctor of Technical Sciences, Professor, Vice-Rector for Long-term Development, Bryansk State Technical University, Bryansk, Russia;
    • KISELEV Evgeny Stepanovich, Doctor of Technical Sciences, Professor of the Department of «Innovative Technologies in Mechanical Engineering» of Ulyanovsk State Technical University, Ulyanovsk, Russia;
    • Vladimir Ivanovich KLISHIN, Doctor of Technical Sciences, Professor, Corresponding Member of the Russian Academy of Sciences, Director of the Institute of Coal, FITZ Coal and Coal Chemistry SB RAS, President of the Association of Machine Builders of the Kemerovo Region, Kemerovo, Russia;
    • KOCHETKOV Valery Nikolaevich, Candidate of Technical Sciences, Director of the FIT of Coal and Coal Chemistry SB RAS, Kemerovo, Russia;
    • LARIN Sergey Nikolaevich, Doctor of Technical Sciences, Professor, Head of the Department of Mechanics of Plastic Shaping of Tula State University, Tula, Russia;
    • Sergey LEONOV, Doctor of Technical Sciences, Professor of the Department of Mechanical Engineering Technology, AltSTU, Barnaul, Russia;
    • MAKARENKO Evgeniya Dionisovna, Editor-in-chief of the publishing house «Innovative Mechanical Engineering», Moscow, Russia;
    • MAKAROV Vladimir Fedorovich, Doctor of Technical Sciences, Professor of the Department of Innovative Technologies of Mechanical Engineering, Perm National Research Polytechnic University, Perm, Russia;
    • NOSENKO Vladimir Andreevich, Doctor of Technical Sciences, Professor, Head of the Department «Technology and Equipment of Machine-building Industries» of the Volga Polytechnic Institute of Volgograd State Technical University, Volzhsky, Russia;
    • OVCHARENKO Alexander Grigoryevich, Doctor of Technical Sciences, Professor, Head of the Department of Mechanical Engineering and Quality Technology, Biysk Technological Institute (branch) AltSTU, Biysk, Russia;
    • SITNIKOV Alexander Andreevich, Doctor of Technical Sciences, Professor of the Department of Land Transport and Technological Systems Altai State Technical University named after I.I. Polzunov, Executive Director of the Innovation and Technology Center, Barnaul, Russia;
    • SMIRNOV Alexander Nikolaevich, Doctor of Technical Sciences, Professor of the Department of Mechanical Engineering Technology of KuzSTU, Director of the Kuzbass Welding Center, Kemerovo, Russia;
    • SMOLENTSEV Vladislav Pavlovich, Doctor of Technical Sciences, Professor of the Department of Mechanical Engineering Technology, Voronezh State Technical University, Voronezh, Russia;
    • TAMARKIN Mikhail Arkadyevich, Doctor of Technical Sciences, Professor, Head of the Department of Mechanical Engineering Technology, Don State Technical University, Rostov-on-Don, Russia;
    • CHIGIRINSKY Yuliy Lvovich, Doctor of Technical Sciences, Professor, Head of the Department of Mechanical Engineering Technology of Volgograd State Technical University, Volgograd, Russia;
    • SHUMYACHER Vyacheslav Mikhailovich, Doctor of Technical Sciences, Professor of the Department of Construction, Technological Processes and Machines of the Volga Polytechnic Institute of Volgograd State Technical University, Volzhsky, Russia;

    Address:

    T.F. Gorbachev Kuzbass State Technical University

    650000 Vesennya Street, 28, Kemerovo, Russian Federation

    For all questions contact to

    Oleg Ostanin +7-905-069-16-68

    ispcime@mail.ru

    Information letter